How to Build Your Own NES Classic with a Raspberry Pi and RetroPie

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 1

The NES Classic Edition is a new, official clone of the original Nintendo Entertainment System, and one of the best ways to play your favorite retro games. Unfortunately, it’s so popular that it’s nearly impossible to get your hands on one. Don’t pay $300 on eBay when you can use the modestly-priced Raspberry Pi to build your own—with even more games.

What Is the NES Classic, and Why Is the Raspberry Pi Better?

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 2

In the fall of 2016, Nintendo released the NES Classic Edition, a miniature replica of the old 1980s-era Nintendo Entertainment System. It ships with 30 classic games including Super Mario Bros., The Legend of Zelda, and Castlevania and an old-school NES controller (albeit with a very short cable and different connector to accommodate for the smaller size of the NES Classic).

It retails for $60 and ships with one controller—you can purchase a second player controller for an additional $10, bringing your total investment up to $70. Unfortunately, the console has proven so popular and Nintendo has produced so few that they’re nearly impossible to find for their original list price, only appearing on sites like eBay for a 200-500% markup.

Don’t despair, though: even if they’re so rare that you’ve never even seen one in person (let alone had a chance to buy one), you can easily roll your own robust NES Classic at home—with more games and more features. In today’s tutorial, we’re going to combine the economical Raspberry Pi, some free software that emulates the NES, and some inexpensive USB NES controllers to create a DIY version that’s even better than the original.

Better how? Not only will your DIY version include all the features of the actual NES Classic—like save states, CRT shaders for retro-looking games, and great looking organization with cover art—but it will allow you to play any NES game (not just the 30 included with the Classic), use any USB controller you want (not just the simple 2-button NES controller), and includes better save states and organization.

And, while we won’t cover it in this guide, your system will be able to play games from other systems too—like Atari, Game Boy, Super Nintendo (SNES), Sega Genesis, and even later systems like PlayStation Portable or Nintendo 64. You can see a full list of supported systems here.

What You Need

To follow along with our tutorial, you’ll need a handful of things and a bit of free time to weave them all together.

A Raspberry Pi and Its Accessories

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 3

First and foremost, you’ll need a Raspberry Pi microcomputer and some basic accessories for it. The computing power required to run a Nintendo Entertainment System emulator is very low, so if you already have an older Raspberry Pi model 1 or 2 laying around, you can (and should!) use it. If you need to purchase a new Pi, by all means buy the most current Raspberry Pi 3 ($40).

In addition to the Pi, you’ll need an appropriately sized SD card or microSD card (based on your Pi model), an HDMI cable to connect it to your TV, a USB keyboard (only temporarily for setting it up), and a good power supply. You’ll also probably want internet access on the Pi to download updates and transfer games—you can do this with an Ethernet cable or with Wi-Fi. The Raspberry Pi 3 has Wi-Fi built in, while older models will require a USB Wi-Fi adapter.

If you’re new to the Raspberry Pi, don’t worry: we’ve written a detailed guide to all the parts you’ll need, so check out that article for more info.

The Case Makes the Project

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 4

An NES-inspired Raspberry Pi case, available on Etsy.

To round out your Pi setup, you’ll also want a case. If you’ve already done a bunch of Pi projects, then you already have a case, which is fine. But if you’re starting from scratch or really want the full experience, you might consider getting a custom NES-themed case for your Raspberry Pi.

While you won’t find Nintendo-branded cases at major retailers like Amazon (for obvious trademark/copyright reasons) you will find tons of them around the web. We can’t recommend any directly, as we haven’t purchased any, but there are some great roundups showcasing 3D printed and DIY cases over at All About 3D Printing  here and here. If you don’t have a 3D printer, you can often buy ones on sites like Etsy.

Controllers: Old School or Modern Comfort

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 5

Next, you’ll need at least one USB controller (two if you want to play games with a friend). You can approach the controller situation one of two ways: First, you can go pure classic and get a pair of USB NES controllers.

This approach, we’ll be the first to admit, was far more difficult than we originally anticipated. It seems like it would be incredibly simple to just buy some cheap and well made NES controllers, but in reality there is such a run on the market right now that listings are often inaccurate, controllers are difficult to get, and the best practice we can recommend at the moment is to buy multiple controllers at once, return the one you don’t want, and keep the good ones (that have good heft, good button responsiveness, and play well).

We tested the two most popular USB NES controllers on Amazon: the Retro-Link controller, and a generic but well-reviewed Classic USB NES Controller (that, when actually arrived, was branded iNext). While we liked the heft of the Retro-Link better, but button responsiveness of the iNext controller was better. Practically speaking, this is a trial and error experience. (If you want something classic but more comfortable than NES controllers, we have nothing but good things to say about this Buffalo SNES controller, too.)

The other approach you can take, which is less authentic feeling but a bit more versatile, is to purchase a more modern controller, like a wired Xbox 360 controller. Not only is the build quality and availability more consistent, but the emulation platform we’re about to set up, RetroPie, supports more than just the NES—so if you want to play games from other systems, a newer controller with more buttons is nice.

Either way, you’ll need at least one USB controller for the project, so pick your favorite.

The Software: RetroPie and ROMs for All Your Favorite Games

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 6

In addition to the hardware, you’ll also need some software to play your games. You’ll need to download a copy of RetroPie, a fantastic bundle of software that combines a number of emulation tools and software into one very user-friendly interface.

For our purpose, we’ll be using the premade images for the Raspberry Pi (as opposed to installing it over an existing operating system). Download the right image for your Pi model number here. Additionally, you’ll need some sort of tool to burn that image to your SD card—our tool of choice is the cross-platform Etcher image burner.

Finally, and thematically the most important, you’ll need some games! These come in the form of ROM files which you can either rip yourself (with the appropriate hardware) or download from the net. Acquiring ROMs is an exercise, because of fuzzy legal issues, best left to the reader—we won’t directly link to ROMs or ROM sites here. That said, however, a simple Google search will take you far.

Step One: Prepare Your Pi

With all the aforementioned materials gathered, it’s time to dive into preparing the Pi. First, we’ll set up the SD card. Pop your SD card in your computer and fire up Etcher. The process is as easy as 1-2-3: select the RetroPie image you downloaded, confirm the SD card is the selected disk, and then click “Flash!”

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 7

Wait for the image to finish burning, eject the SD card safely from your computer, and grab your Pi and accessories. Hook the Pi up to your TV with your HDMI cable, plug in your USB keyboard and controller(s), insert the SD card, and plug in the power cable to power the system up.

If you ever get stuck during the installation process, feel free to refer to our Raspberry Pi beginner’s guide, which has a bunch of useful info on the initial setup.

Step Two: Configure RetroPie

Once you’ve powered up the Pi for the first time with the RetroPie SD card installed, it will run through some one-time setup steps automatically (like expanding the partition, unpacking files, and so on). Then it will reboot bringing you to the controller configuration screen as seen below.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 8

Just as the screen suggests, you should press and hold any button on your USB controller to start the configuration process. In the configuration menu, briefly press the corresponding button for each listed entry (e.g. up on the directional pad to start).

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 9

Eventually, you’ll get to button entries that may not have corresponding buttons on your controller (for example, if you’re using a traditional NES controller and it starts asking you about X and Y buttons). When you reach the entries for the buttons you don’t have, simply press and hold a button you have already programmed for 2 seconds, then release it. This will signal to the configuration wizard that you wish to skip that button. Repeat this process until you have skipped all the unneeded entries and can click “OK” to proceed.

At this point, you’ll see the following screen with the RetroPie logo and “13 Games Available” beneath it.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 10

“Thirteen games? Sweet!” you might be thinking. Not so fast: those aren’t 13 games you can play, those are 13 configuration tools for “RetroPie” (which is recognized as one of your emulators, even though it’s really the underlying system). Don’t worry, in just a moment we’ll get around to the actual games.

If you’re using an Ethernet cable with your Pi for network access instead of Wi-Fi, you can jump right to the next section to get right into putting games into RetroPie. If you’re using Wi-Fi, however, press the A button on your controller to launch the menu. The RetroPie default color scheme makes it a bit hard to see in a smaller screenshot, but the entry for Wi-Fi is the last one on the list, as seen below.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 11

When you select the “WIFI” entry, it will launch a Wi-Fi configuration tool. Select “Connect to WiFi Network”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 12

Next select your home network, input the password, click OK, and then click OK again on the main screen to exit the application (you’ll be returned to the screen you selected the Wi-Fi entry from).

Although you can use RetroPie without internet access, it is far easier to transfer your games to the device using the network.

Step Three: Add Your Games

With our Pi set up and connected to our home network, the most important step is upon us: loading it up with sweet, sweet, retro games. The easiest way to transfer games is using network shares. (You can use a USB drive, but the network setup is actually even simpler, so we’ll detail that method here). Let’s get started.

By default, the RetroPie box is assigned a network share named “retropie”, and you can browse to it by simply opening up Windows Explorer on your PC and typing \\retropie\ in the address box. Then, just open the “roms” folder, navigate to your system of choice (we’ll use “nes” in this example) and copy any ROM files to that folder. We copied one of our favorite RPG games, Crystalis, as our test ROM.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 13

Once you’ve added games, you then need to restart RetroPie (or, more specifically, the Emulation Station interface underneath). On your Pi, press the B button on your controller to return to the main menu then press the Start button to open the main menu, as seen below. Select “Quit”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 14

Select “Restart EmulationStation” and confirm you really wish to restart it.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 15

When it reboots, suddenly there won’t be just an entry for “RetroPie” in the main GUI, but (because we added the roms to the “nes” directory) you’ll see an entry for the Nintendo Entertainment System. That’s a key step in setting up any emulator on RetroPie. There are tons of emulators for different video game platforms installed by default, but they will not appear in the interface until you add at least one ROM to their “roms” directory.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 16

Press the A button see the available games. Select the game you wish to play (the only game in our case) and press A again.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 17

After a very brief moment, the NES emulator will finish loading your ROM and you’ll see the game just as if you’d loaded it up on a vintage NES unit.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 18

At this point, you can play the game just like you were playing the original. If you need to restart the game, simply press SELECT and B at the same time. If you want to exit the game back to the RetroPie menu, press SELECT and START at the same time.

The Juicy Extras: Cover Art, Shaders, and Save Games

That’s all you need to get started playing. But if you want the full “I built my own NES Classic” experience, there a few more extra features we need to tap into: cover art (which make your library pretty and easy to browser), shaders (which make the game look more retro on your modern TV), and save states (which let you save your game, even if the original game didn’t support it. These are all features included in the official NES Classic.

Add Cover Art to Your Library

Once you have a bunch of games copied over to your “roms” folder, head back to the NES menu (where we just launched our test game), press the Start button to open the menu, then select “Scraper”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 19

In the next screen, you can adjust the settings. Leave the scraper as “THEGAMESDB”. You can toggle ratings off if you want (we left it on). Then select “Scrape Now”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 20

Because this is our first scrape, switch the filter to “All Games”. By default, the scraper is set to just use the system it is loaded in (in this case, NES), so no need to change anything. Finally, ensure “User Decides On Conflicts” is turned on. This is important, otherwise the scraper may scrape the wrong data if it isn’t sure if the game is Double Dragon or Double Dragon II.

The only reason you would not want to use that setting is if you had hundreds of games to scrape and did not want to manually confirm each selection (you would, however, have to go back and manually fix any conflicts later, game by game). When you’re ready, select “Start”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 21

As the system works, you will be prompted to confirm each selection (even if there is only one pick). Press A once you have selected the correct game.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 22

When it’s finished, you’ll have a nicely organized game collection.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 23

Get that Old School CRT Vibe with Smoothing and Shaders

One thing you might notice immediately after plaing a game is how vibrant and crisp the graphics look. In fact, upon loading up our demo game Crystalis, the first thing I noticed was that the colors were so much brighter and the lines so much sharper than I remembered.

The primary reason for this disparity is how images are displayed on a digital display versus an analog CRT display. Your computer monitor and HDTV are presenting the game with a perfect 1:1 pixel-to-pixel ratio, whereas your old CRT display was phosphor-based with a softer image and light/color “blooming” around the individual points on the screen.

To compensate for that, you can set up your system to apply shaders or smoothing algorithms in order to recreate that CRT effect. Not sure if that’s something you care about? Let’s compare images captured from the same game at the same moment with different effects applied. First, let’s look at how the very first playable moment in Crystalis looks with no shaders or smoothing.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 24

Notice that the lines are all very crisp, significantly more crisp than you probably remember (if you played the original game on the original hardware). If you like this crisper look with sharp edges, then by all means play the game this way.

Let’s take a look at how the game looks with the graphics smoothed out using the smoothing algorithm. If you’re using an older Pi, this is a great option as the smoothing algorithm (unlike the shaders) puts little to no load on the GPU.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 25

Looking at this on your computer monitor or a mobile device with a sharp high resolution screen, you might be thinking “That looks… blurry.” but when viewed at a distance (like that between your couch and television), the smoothing effect does give games a more CRT-like feel and the blur doesn’t feel so intense. Stand back and look at the rocks on the edge of the picture compared to the first image and you’ll see what I mean.

Finally, you can using shaders to create CRT effects like scanlines and even slight distortion (as the front of CRT displays was slightly curved in most cases). Here’s a simple CRT shader applied.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 26

Again, when viewed in a close comparison crop like we have here, the effect seems pronounced (just as if you were sitting very close to a CRT screen). But when viewed at a distance, it looks very natural. In fact, even though I didn’t mind how the game looked sans smoothing or shaders, it was when I turned on a CRT shader I went “Oh! That looks like the game I remember!”

Both the smoothing and shaders settings are located in the same place, but there’s a little tweak we have to perform before we dive into that menu. Although RetroPie is supposed to ship with shaders already preloaded, in our experience you need to manually update the shaders list (which you’ll need an internet connection for, so plug in that Ethernet cable now if it isn’t already). Return to the RetroPie setup menu we originally visited and select “RetroArch” from the menu, as seen below.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 27

This will launch the very retro-looking RetroArch configuration menu. Select the entry “Online Updater”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 28

Within the “Online Updater” menu, select “Update GLSL Shaders”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 29

Down in the lower left corner, in tiny yellow text, you’ll see a little update indicator, showing that “shaders_gsls.zip” is downloading. Wait for it to finish. Once the process is complete hit the Esc key on your keyboard or the B button on your controller to back out of the menus all the way to the main menu. There, select “Quit RetroArch”. Once back in the RetroPie menu, select “RetroPie Setup”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 30

Inside the RetroPie setup menu, select “configedit – Edit RetroPie/RetroArch configurations”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 31

Select “Configure basic libretro emulator options”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 32

Here you can choose to configure shaders and smoothing on an emulator-by-emulator basis, or apply it universally. Unless you want different shader settings for each system, it’s best to just select “Configure default options for all libretro emulators”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 33

Within this menu, you’ll find all the settings you need for both smoothing and shaders. It’s important to note that smoothing and shaders are an either/or solution—you can’t use both at once. If you’re trying to decide between the two, remember that smoothing is much lighter on the Pi’s resources than shaders.

If you want to use smoothing, select “Video Smoothing” and change the “false” to “true”. You can then return back to the main menu and play with the smoothing enabled.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 34

If you want to use shaders, you have two steps. Ensure that “Video Smoothing” is set to the default of false. Then set “Video Shader Enable” to “true”. Finally, select “Video Shader File” to select the shader you wish to use.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 35

The shaders list might look a little daunting, but there is an easy solution. Simply look for shader files with “pi” in the name, like the “crt-pi.glslp” file seen above. These shaders have been optimized for the Raspberry Pi’s less powerful GPU. You can always use other shaders, but don’t be surprised if performance suffers.

If at anytime you no longer wish to play with smoothing or shaders (or wish to change which shader you are using), you can simply return to these menus and set the values to false or change the shader file.

Set Up Save States…Because Contra Is Really Hard

If you’re a purist, you might just want to skip this section altogether. Some games natively support saving your progress, some games do not (you can, for example, save your game in The Legend of Zelda but you cannot in Super Mario Bros.).

Even those games that support saving require you to save the game in a specific way, often using some in-game mechanism like visiting an inn or checking in at a space station. With emulators, you can save the game anytime and anywhere, just like you might save a file in Microsoft Word as you work on it. It also gives you multiple save slots per game, so you can have as many save files as you want. It might not be the purist way to do it, but man is it a nice way to cut down on your frustration levels while playing insanely difficult games.

You can save and load your game as you play by using controller-based hotkeys.  For those of you using a controller with lots of buttons (like the aforementioned Xbox 360 controller), you don’t need to do any fiddly key mapping at all, you can simply use the default RetroPie/RetroArch button maps for your controller. Check out this RetroPie wiki entry to see the default joypad hotkeys.

If you’re using the NES controller, however, the limited number of buttons really imposes a bit of a burden. If you wish to use the save state system, you will need to do some minor keymap editing. The default keymap for saving and loading save states uses the shoulder buttons on a controller, which aren’t present on the NES controller. We’ll need to remap those buttons in order to access those functions. There are two ways to do so: you can either edit the retroarch.cfg file located in \\retropie\configs\all\retroarch.cfg (which is very very tedious) or you can use the RetroArch interface (which is a normal amount of tedious). We’ll walk through the latter.

To use the keymap interface, launch the RetroArch menu system again (from the main RetroPie menu, select the RetroPie category and then select “RetroArch”). Within the main menu, select “Settings”. Before we make any changes, we need to toggle on save-on-exit setting to preserve those changes.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 36

Within the Settings menu, select “Configuration”.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 37

Within that menu, select “Save Configuration On Exit” to toggle saving on. Without this setting, any changes we make will not be preserved when we exit the RetroArch menu system.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 38

Press the B button or the Esc key to back out of the menu until you’re at the main RetroArch menu again. Select the Settings menu.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 39

Select “Input”. Here is where you’ll find all the settings for keybindings and related configurations.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 40

Select “Input Hotkey Binds”. Here we can change what the hotkey combinations on your controller do.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 41

In order to both unlock access to the RetroArch menu while in-game, as well as give us proper access to save states, there are three button combinations we need to map: save, load, and access the RetroArch menu. You can opt to use whatever button combinations you wish for each of these, but the button combinations we’ve selected for this tutorial are optimal in the sense that they do not interfere with any existing keymaps.

Let’s start with “Load state”. Select that entry and press A on your controller. You’ll be prompted with a four second countdown to press the key you wish to map to this function.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 42

You want to map the Down key on the directional pad so that when you press the hotkey activator (the Select button) and Down it will save your game. Select “Save state” and map it to the Up key on the directional pad. Go ahead and leave the “Savestate slot +/-” entries alone as those are fine (it is set so that you can click left or right to change the save slot).

Finally, scroll all the way down to the bottom of the list until you see “Menu toggle”. Select it and then map the A button to it (this will allow you to press Select+A) in the game to access the RetroArch menu.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 43

Press the B button to back out of the menus until you are at the main screen and then select “Quit RetroArch” to save your changes.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 44

At this point you’re all set and can now use the following button combos:

  • Select+Start: Exit the emulator.
  • Select+B: Reset the emulator.
  • Select+A: Pause the game and open the RetroArch menu from within the emulator.
  • Select+Right: Increase the save slot (e.g. move from Save Slot #1 to #2)
  • Select+Left: Decrease the save slot (e.g. move from Save Slot #2 to #1)
  • Select+Up: Save the game to the currently selected save slot.
  • Select+Down: Load the game from the save in the current save slot.

how-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 45

Now you can play through even the hardest of games without having to start from scratch every time you get a Game Over.


You’re finally done: we’ve not only recreated the experience of using the NES Classic, but we’ve actually created a superior version, since it can play any NES game ever made, supports more save slots than the NES Classic, more shaders and video options, and (if you wish to do so) you can reach beyond the scope of this tutorial and even use Game Genie-like cheat codes, instant replays, and more. Check out the RetroPie and RetroArch wikis for more information about all the advanced features tucked away in the platform, as well as our guide to RetroArch’s advanced settings.

RELATED ARTICLEShow-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 46How to Set Up RetroArch, The Ultimate All-In-One Retro Games Emulatorhow-to-build-your-own-nes-classic-with-a-raspberry-pi-and-retropie photo 47Eight Advanced RetroArch Features that Make Retro Gaming Great Again

Image Credits: Fynsya/Etsy and Clive Darra/Flickr.

Article How to Build Your Own NES Classic with a Raspberry Pi and RetroPie compiled by Original article here

Recommended stories

HTC's Vive Deluxe Audio Strap makes its VR headset more comfortable The SteamVR headset now has built-in headphones and a more comfortable head mount. Compared to Playstation VR and the Oculus Rift, HTC's Vive virtual reality headset is a bit of a face-hugger. It offers a window into beautiful virtual realms and boasts room-scale motion tracking but, well, it's just not very comfortable. Soon, that may change. HTC just announced that it's creating a Vive Deluxe Audio Strap to replace the headset's elastic headgear. Not only does the new strap look a lot more ergonomic, but it tacks on one of the Oculus Rift's most convenient features: built in headphones. At a glance, the new Vive head mount looks like a cross between the Rift's ridged strap system and PlayStation VR's adjustable plastic band. It reaches over the top of the user's head, like the Rift and the Vive's existing soft straps, but still features a adjustable sizing dial for tightening the band. That should be a marked improvement over the velcro belt adjusters that come with the stock band. HTC didn't say much about the headstrap's included headphones, but they seem to be a removable on-ear solution, not unlike what ships with the Oculus Rift. In other words, you'll still be able to use your own headphones if the built in audio isn't to your liking. At the end of the day, this still leaves the HTC Vive as a heavier VR headset than its competitors -- but it could go a long way to mitigating the Vive's biggest flaw. How much that fix will cost you is still up in the air: HTC says the new headgear is scheduled to ship sometime in Q2, but isn't willing to share its pricetag just yet.

The SteamVR headset now has built-in headphones and a more comfortable head mount.

More stories

The Best Backup Software of 2017

Nobody likes taking the time and effort required to back up their computer's system, document, and media files, but doing so can save you a world of hurt. These apps can take care of it for you.

How to Create a Bootable USB Installer for macOS Sierra

The Mac App Store is the default way to upgrade or install macOS, but it doesn’t work for everyone. Maybe you’ve got multiple Macs and a limited amount of bandwidth, and don’t want to download the entire operating system for every system. Or maybe you’re looking to install the operating system from

Top reasons why you need to hide your IP

Internet Protocol (IP address) is a binary number which helps to detect the computer and other gadgets on a TCP/IP network. In simple words, without an IP, any...